"This site requires JavaScript to work correctly"
DIT STUDENTS
You are pioneering & vibrant
Header minimieren Header maximieren

documents & organisation

module handbooks

Module handbooks are the guide to all modules of each undergraduate or postgraduate degree programme. They contain information on prerequisites, contents, learning outcomes, ECTS credit points, duration, work load, literature, references, lecturers of the offered modules and lectures.

BACHELOR

 

MASTER

 

 

 

 

study plans

 

lecture schedules

You can find your lecture schedule at my.th-deg.de. You only need your university account to log in.

Through this platform you can configure your personal lecture schedule and find out on a daily basis if there are any changes or cancellations to your lectures.

 

discounted deutschlandticket for students

DIT students can use local transport in Germany with the discounted Germany ticket. The Bavarian discount ticket is a full-fledged Germany ticket. It is valid nationwide on all local public transport, i.e. buses, trams, underground trains, suburban trains and regional trains.

From 15 September 2025, the Deutschlandticket is available in the form of the Bavarian discount ticket via a new provider (VGN/VAG).

 

How it works:

  1. 1. Go to the VGN/VAG discount ticket website, the VGN Timetable & Tickets app, or the Nürnberg Mobil app. 
     
  2. 2. Select Technische Hochschule Deggendorf as your university to verify your eligibility for the Bavarian discount ticket. 

    3. Choose the app in which you want your ticket to be displayed.

  3. 4. To use the discount ticket in the selected app, log in with the same email adress you used when ordering the ticket. 

    5. Your ticket will appear in the app in time for the start of its validity. The subscription will be automatically extended until the end of the semester unless you cancel it beforehand. 

 

Please note: For the first order, a processing time of up to three days applies. In the following month during the semester, the ticket will be issued approximately one week before the start of the next month. 

theses

The following guidelines apply to all faculties and are intended to support you in successfully writing your thesis: Thesis guideline

Primuss instructions for registering your thesis.

You can find information on final bachelor and master theses in the relevant faculty:

You can register and submit your thesis directly via the Primuss Portal.

You can find more information and the upload fields in the Primuss Portal under Registration/Submission of Thesis.

Short description of the process:
1. Students enter the registration in Primuss and generate the registration form as a PDF from it.
2. The PDF must be signed by the student and then uploaded back into the portal.
3. The examiners do not have to sign, they receive an email and can confirm the registration digitally.
4. The study centre automatically checks the registration and then sets it to "approved" (please be patient here, this step does not happen immediately after uploading. The registration date is taken from the signed PDF).
5. The student submits the agreed form of the thesis to the lecturer and uploads the required documents in Primuss (ZIP file of the thesis and if applicable, the signed approval in case of a change of topic).
6. The Study Centre checks whether everything has been uploaded correctly.
7. The form for grading and the expert opinion on the final thesis must currently still be submitted by e-mail (Campus Cham: sz-cham@th-deg.de).

If you have any questions regarding the content, please contact the responsible person at the Study Centre.
For technical questions, problems with the upload or similar, please contact Primuss Support: primuss-support@th-deg.de

You can find the requirements of the examination committee, a sample of the cover sheet of the thesis as well as the declaration for the submission of the thesis below:

Bachelor programmes: Civil and Construction Engineering, Environmental Engineering, Construction Engineering

Master programme: Civil and Environmental Engineering

 

Specifications of the examination board

You can register and submit your thesis directly via the Primuss Portal.

Further details and the upload fields can be found in the Primuss portal at Registration/Submission of Thesis.

The procedure in a nutshell:

1. The student enters the registration in Primuss and generates the registration form as a pdf file.
2. The pdf file, signed by the student, must then be uploaded back to the portal.
3. The supervisor does not need to sign, he will receive an email and can confirm the registration digitally.
4. The student submits the agreed form of thesis to the lecturer and uploads the required documents to Primuss (zip file of the thesis and approved thesis topic).
5. The Centre for Studies ensures that all documents have been uploaded correctly and sets the thesis status to ‘submitted’ (please be patient here as well. If everything is in
order, the online submission date is recorded as submission date.)

For any content-related questions, please contact the person responsible at the Centre for Studies.

For any technical questions, problems regarding the upload or similar, please contact the Primuss support.

Specifications of the examination board (currently only available in German)

You can register and submit your thesis directly via the Primuss Portal.

Further details and the upload fields can be found in the Primuss portal at Registration/Submission of Thesis.

The procedure in a nutshell:

1. The student enters the registration in Primuss and generates the registration form as a pdf file.
2. The pdf file, signed by the student, must then be uploaded back to the portal.
3. The supervisor does not need to sign, he will receive an email and can confirm the registration digitally.
4. The student submits the agreed form of thesis to the lecturer and uploads the required documents to Primuss (zip file of the thesis and approved thesis topic).
5. The Centre for Studies ensures that all documents have been uploaded correctly and sets the thesis status to ‘submitted’ (please be patient here as well. If everything is in
order, the online submission date is recorded as submission date.)

For any content-related questions, please contact the person responsible at the Centre for Studies.

For any technical questions, problems regarding the upload or similar, please contact the Primuss support.

 

 

Specifications of the examination board, sample title page for the thesis, Declaration of original autorship, request for change of topic

You can register and submit your thesis directly via the Primuss portal.

Further details and the upload fields can be found in the Primuss portal at Registration/Submission of Thesis.

The procedure in a nutshell:

1. The student enters the registration in Primuss and generates the registration form as a pdf file.
2. The pdf file, signed by the student, must then be uploaded back to the portal.
3. The supervisor does not need to sign, he will receive an email and can confirm the registration digitally.
4. The student submits the agreed form of thesis to the lecturer and uploads the required documents to Primuss (zip file of the thesis and approved thesis topic).
5. The Centre for Studies ensures that all documents have been uploaded correctly and sets the thesis status to ‘submitted’ (please be patient here as well. If everything is in order, the online submission date is recorded as submission date.)


For any content-related questions, please contact the person responsible at the Centre for Studies.  https://www.th-deg.de/en/study-with-us/advice-support/admin-centre
For any technical questions, problems regarding the upload or similar, please contact the Primuss support. (primuss-support@th-deg.de).

 

Regulations for writing a thesis

You can register and submit your thesis directly via the Primuss portal.

Further details and the upload fields can be found in the Primuss portal at Registration/Submission of Thesis.

The procedure in a nutshell:

1. The student enters the registration in Primuss and generates the registration form as a pdf file.
2. The pdf file, signed by the student, must then be uploaded back to the portal.
3. The supervisor does not need to sign, he will receive an email and can confirm the registration digitally.
4. The Centre for Studies automatically reviews the registration and sets it to ‘approved’. (Please be patient - this step does not occur immediately after the upload. The registration date is adopted from the signed pdf.)
5. The student submits the agreed form of thesis to the lecturer and uploads the required documents to Primuss (zip file of the thesis and approved thesis topic).
6. The Centre for Studies ensures that all documents have been uploaded correctly and sets the thesis status to ‘submitted’ (please be patient here as well. If everything is in order, the online submission date is recorded as submission date.)

For any content-related questions, please contact the person responsible at the Centre for Studies: www.th-deg.de/en/admin-centre
For any technical questions, problems regarding the upload or similar, please contact the Primuss support. (primuss-support@th-deg.de).

Engineering Physics,
Industrial Engineering,
Technology Management,
Applied Sports Science

  • Bachelor and Master:

    You can complete the registration directly over the Primuss portal, where you will find all neccessary detailed information.
    A summary of the process:

1.  Register in Primuss and generate the form as a PDF
2. Sign the form and upload it back to Primuss
3. Your thesis advisor must sign as well. He/she receives an email notification to digitally sign the registration document
4. Hand-in the thesis form with agreed topic to the lecturer/professor and upload the required documents to Primuss (ZIP file of the work and, if the topic changes, a signed approval)
5. Check if everything has been correctly uploaded and set to submit (please be patient, if everything is correct the submitted date will appear online)

Form for the evaluation of the colloquium for study programmes at Campus Cham (in German).

Further questions can be directed to your contact in the Centre for Studies.
If you have technical difficulties, contact primuss-support@th-deg.de.

 

Applied AI for Digital Production Management (in Cham)

Mechatronics - Focus on Digital Production / Mechatronics and Project Management for Digital Production (in Cham)

Mechatronic and Cyber-Physical Systems (in Cham)

Mechatronics and Project Management for Digital Production (in Cham)

Artificial Intelligence for Smart Sensors and Actuators (in Cham)

Robotics

Studiengang: Gesundheitsinformatik
Studiengang: Physician Assistant
Studiengang: Management für Gesundheits- Sozial & Rettungswesen
Studiengang: Pflege
Studiengang: Pflege Dual
Studiengang: Physiotherapie Dual

Note on the use of the DIT/ THD logo

Use is only permitted if it is a university publication with an official background. The logo may not be used for student work (e.g. for term papers or student research projects as well as Bachelor/Master theses) or publications by professors in the context of their secondary employment.

Book recommendation for scientific work

"Scientific Work" by Prof. Dr. Heesen
Hanser Verlag, ISBN-13: 978-3642033759

forms

Relevant applications can be found in the corresponding faculties:

Bauingenieurwesen

Baumanagement

Bau- und Umweltingenieurwesen

Umweltingenieurwesen

Projektmanagement im Bauingenieurwesen

Please follow the "Guideline for the Recognition" and send the "Annex" to the following e-mail address anerkennungen-fak-ai@th-deg.de.

  •  

International Management

Angewandte Volkswirtschaftslehre

Angewandte Wirtschaftspsychologie

Betriebswirtschaft

Strategisches und Internationales Management

  • Weitere Anträge finden Sie in iLearn/SIM/Allgemeines

Tourismusmanagement

Master Digital Business / Master Digital Business Psychology

 

Please note that according to the General Examination Regulations of the Deggendorf Institute of Technology (APO) in conjunction with the amendment statutes of 15 March 2015, recognition is only possible until the end of the lecture period of the semester in which the enrolment took place.

Electromobility, Autonomous Driving and Mobile Robotics

Electromobility, Autonomous Driving and Mobile Robotics - International

Electrical Engineering and Information Technology

Electronics Engineering for Artificial Intelligence - International

Electrical Engineering and Information Technology - International

Media Technology

Applied Research in Engineering Sciences

Maschinenbau (Bachelor):

Maschinenbau (Master):

Mechatronik

Technisches Design

 

Bachelor Applied Sports Science

Bachelor Interdisciplinary Engineering Sciences

Bachelor Mechatronik und Projektmanagement für Digitale Produktion

Bachelor Technische Physik

Bachelor Wirtschaftsingenieurwesen

Master Technologiemanagement

Master Angewandte Sportwissenschaften mit Schwerpunkt interprofessionelle Betreuung im Sport

 

Study programmes in Cham:

Please follow the "Guideline for Recognition" and send the completed application form including all necessary attachments to the study centre: sz-cham@th-deg.de

Bachelor Mechatronics and Project Management for Digital Production

Master Applied AI for Digital Production Management

Master Artificial Intelligence for Smart Sensors and Actuators

Master Mechatronic and Cyber-Physical Systems

Master Robotics

General applications

Building Products and Processes

Health Informatics

Industrial Engineering/Maintenance and Operation

International Tourism Management/ Health & Medical Tourism

Please send your application form and attachments (see checklist) to: sprachenzentrum@th-deg.de

  •  

Relevant applications can be found in the corresponding faculties:

Bauingenieurwesen

Bau- und Umweltingenieurwesen

Umweltingenieurwesen

Angewandte Informatik

Cyber Security

Interaktive Systeme/Internet of Things

Künstliche Intelligenz

Künstliche Intelligenz (Quereinstieg)

Wirtschaftsinformatik

Angewandte Volkswirtschaftslehre

  • Anträge finden Sie im iLearn Kurs/Allgemeines/Formulare

Angewandte Wirtschaftspsychologie

  • Anträge finden Sie im iLearn Kurs/Allgemeines/Formulare

Betriebswirtschaft

Strategisches- und Internationales Management

Tourismusmanagement

Elektro- und Informationstechnik

Medientechnik

Applied Research

 

Maschinenbau (Bachelor):

Maschinenbau (Master):

Mechatronik

Technisches Design

Mechatronik Dual Cham

Mechatronische und cyber-physische Systeme

Mechatronics and Project Management for Digital Production

Technische Physik

Wirtschaftsingenieurwesen

Technologiemanagement

Anerkennung von Prüfungsleistungen der Fakultät AGW

Angewandte Sportwissenschaften mit Schwerpunkt Training und Gesundheit

Gesundheitsinformatik

Management im Gesundheits-, Sozial- und Rettungswesen

Physiotherapie dual mit Schwerpunkt Bewegungswissenschaften

Pflege Dual

General applications:

  • You can complete this application online in the Primuss portal under "Applications and Messages" and submit it to the study centre.
  • You can complete this application online in the Primuss portal under "Applications and Messages" and submit it to the study centre.
  •  

Here you will find all the information and documents you need for enrolment: Enrolment

exams

Exam registration takes place via the Primuss portal of Deggendorf Institute of Technology.

If a subject is not listed in the Primuss portal, please contact your responsible administrator.

In exceptional cases (e.g. for a practical semester or semester abroad without access to the Primuss portal), examinations can also be registered via the exam registration form.

You will also be notified by the Study Centre by email about the deadline for checking exam registration.

Withdrawal from an examination is only possible in principle if the withdrawal is made within the specified period of notice of the examination procedure in the Primuss portal or in writing to the study centre.

In the case of course-related credits (e.g. AWP subjects) which take place before the examination period and for which registration is required, online or written cancellation must be made at least seven days before the respective credit.

If there is no effective withdrawal before the examination and the student has missed the examination for reasons for which he/she is responsible, the grade will be awarded incorrectly.

 

For the crediting of exam performances from home and abroad, an application form must be completed and submitted to the Student and Examination Office.

exam schedules

The exact exam times and any respective aids will be announced here at least 14 days before the beginning of the exam period. The schedules are currently being updated, so if an exam schedule does not correspond to the summer semester 2026 dates, it will be updated shortly.  All schedules include exam no. that you will need for your exam registration.

IMPORTANT: Exam dates may change, so please check your exam schedule again shortly before the exam!

Please note:

  • All candidates will be randomly assigned a seat. This seat number will be communicated to the students by e-mail one day before the exam and are also available a few days in advance in PRIMUSS under the registered exams.
  • Mobile phones and other electronic devices must not be placed on the table during examinations and must not be operational! Only approved aids may be present at the workplace.

Bachelor exam schedules

Master exam schedules

Bachelor exam schedules

Master exam schedules

Bachelor exam schedules

Master exam schedules

Bachelor exam schedules

Master exam schedules

 

Faculty NUW in the SS 2023

Address Stadthotel Deggendorf

Bachelor exam dates

Master exam dates

Part-time studies dates

  •  

Bachelor exam schedules

Master exam schedules

 

Directions to lecture room in Veilchengasse 2

X Katalog FWP

Exam schedule Key Competencies

Bachelor exam schedules

Master exam schedules

Part-time studies

  •  

Bachelor exam schedules

Master exam schedules

All further education courses are taught in German.

Bachelor courses

Master courses

  •  

 

practical semester/internship

The practical semester at the Deggendorf Institute of Technology is carried out in companies and enterprises in Germany or abroad, e.g. in industrial and commercial enterprises, banks, insurance companies or public offices.

Further details (including the duration of the internship) can be found in the examination regulations of the University of Technology.
In addition to the usually 18 weeks of internship in a company, practical courses in the form of block courses are held at the university (PLV).

 

General Information on how to prepare the compulsory internship for bachelor students can be found in the checklist below:

 

Internship standard contracts:


Status and insurance during the internship:

 

Online internship administration

The online internship administration has been directly integrated into Primuss and can be accessed in Primuss via "My studies". All students who start their internship after the summer semester 2023 will use the internship administration in Primuss to record and manage their internship and PLV documents. All students who started the internship before the summer semester 2023 will continue to use the old online internship administration until they have successfully completed the last PLV seminars.
From now on, the PLV confirmation forms will only be uploaded to the internship administration in Primuss.

 

Internship guidelines (divided according to courses of study)

Link to the online internship administration

Civil Engineering (BIW):

Construction Engineering (BMA):

Project Management in Civil and Construction Engineering (PMB):

Environmental Engineering  (UIW):

  •  

Link to the online internship administration

Applied Informatics (AI) and Interactive Systems (IAS):

Bioinformatics (BIN):

Business Informatics (WI):

Cyber Security (CY):

Artifical Intelligence (KI) (German):

Artificial Intelligence (AIN) (Language of instruction: English):

Software Design (SD) (German):

  •  

Link to the online internship administration

Business Administration (BWL):

International Management (IM):

Tourism Management (TM):

Applied Economics (VWL):

Organisational and Economic Psychology (WiPsy):

  •  

 

Link to the online internship administration

Internship coordinators:

Electrical Engineering and Information Technology (ET):

Electromobility, Autonomous Driving and Mobile Robotics (EM):

Media Technolgoy (MT):

Electronics Engineering for  Artificial Intelligence - International (EAI):

Electronics for Artificial Intelligence (EKI):

Electromobility, Autonomous Driving and Mobile Robotics - International (EMI):

Electrical Engineering and Information Technology - International (ETI)

  •  

Link zur Praktikumsverwaltung

Praktikumsbeauftragte:

Studiengang Maschinenbau(MB):

Studiengang Mechatronik (MK):

Studiengang Ressourceneffiziente Produktentwicklung / Circular Engineering (CE)

Studiengang Technisches Design (TD):

 

A 6-week pre-study internship is a prerequisite for admission to the Bachelor's degree programmes in Mechanical Engineering and Mechatronics (but can be made up until the end of the 4th semester):

 

  •  

 

Link zur Praktikumsverwaltung

Praktikumsbeauftragte:

Studiengang Angewandte Sportwissenschaften

Studiengang Interdisziplinäre Ingenieurwissenschaften

Studiengang Wirtschaftsingenieurwesen (WIW):

Mechatronics and Project Management for Digital Production

Mechatronics and Project Management for Digital Production

 

General information about the internship semester:

  •  

Link to the online internship administration

Internship coordinators:

Health Informatics

Management in Health, Social and Rescue Services

Physiotherapy majoring in Kinesiology

Physician Assistant

Social Work

Mental Health

  •  

Link to the online internship administration

Building Products and Processes

Business Administration and Service Management:

Industrial Engineering/Maintenace and Operation (IE):

International Tourism Management/ Health & Medical Tourism

Health Informatics

 

  •  

Link to the online internship administration

Study programme Nursing Pedagogy

Study programme Pedagogy in Rescue Services

Study programme Business Information Systems

  •  

Internship contract

DIT's German internship contract can be filled out online, then printed outseveral times (usually 3 times, depending on the internship guidelines of your study course) to be signed by the faculty internship commissioner. After being signed, the first copy is to handed into the Centre for Studies (Studenten- und Prüfungsverwaltung), the second copy is for the internship company, and the third copy can be kept by the student.

General Information

Internship Management System

 

Student service fee during an internship semester: Please note that you must also enroll/register for an internship semester. The student service fee must still be transferred.


Advice and contact

Find an internship:

Have a look at our DIT online job board to find current internship offers. If you need further support, please contact our Career Service Team via mail career-service@th-deg.de. They will also help you prepare your application and check your CV and documents.

Organisational aspects of the internship semester:

If you have any organisational questions about the internship semester, please contact your faculty directly.

Internship abroad:

DIT provides contact addresses, application checks, grant applications, etc. Please contact Romy Geiger for detailed information or visit the following page: Internship abroad

 

information about plv's

1st PLV week Civil and Construction Engineering:

1st PLV week Construction Management:

1st PLV week Project Management in Civil and Construction Engineering:

1st PLV week 1st PLV week Environmental Engineering:

 

2nd PLV week Civil and Construction Engineering:

2nd PLV week Construction Management:

2nd PLV week Project Management in Civil and Construction Engineering:

2nd PLV week Environmental Engineering:

 

  •  

PLV - Bachelor Artificial Intelligence:

 

Career Service PLV:

 

  •  

 

Career Service PLV:

 

  •  

Career Service PLV:

  •  

 

PLV-Events Mechanical Engineering:

PLV-Events Mechatronics:

PLV-Events Technical Design

Register for the PLV weeks:

Frequently asked questions regarding the PLV weeks:

  • How long does the practical semester last?

The internship semester lasts a total of 20 weeks, of which at least 18 weeks are spent at the company and two at the university PLV weeks.

  • When can I start my practical semester?

You must have already earned at least 90 ECTS credits. The practical semester usually takes place in the 6th semester.

  • When are the PLV weeks?

The PLV weeks take place during the semester break. (Period: mid February to 15 March and in September)

  • Where must I hand in my internship contract?

In Primuss you will find the internship administration and, as described in the overview there, upload the contract and register the internship semester.

  • When do I have to hand in the contract at the latest?

One week before the beginning of the first PLV week. If you can't meet this deadline, please contact Albert Schreiner!

  • Where can I find companies that offer an internship?

You will find company names in the showcase on the 2nd floor (next to office C 203). For semesters abroad you can find company addresses in iLearn under Career Service. Alternatively, you can use the company list in Primuss

  • What documents does the university need after my internship?

We need an internship report, the presentation and the internship certificate within one month of completing the internship.

  • Where do I have to hand in the documents?

Simply upload them in the Internship Management System o+n Primuss.

  • Can I have days off?

You may have a maximum of 5 days off during your internship in the company. 
You are not allowed to have any days off during the PLV weeks.

  • Do holidays have to be made up?

Basically yes, unless the company gives you those days.

  • I cannot register in the Internship Management System?

Please send an email to web-support@th-deg.de

  • How should the internship report be designed?

The internship report should be at least 18 DIN A4 pages, an overview (contents, highlights, project overview) of your practical semester, no report booklet.

  • How should the presentation be designed?

The presentation should last 10 to 15 minutes, 8 to 12 slides should be prepared in PowerPoint. Contents: Highlights of the internship, project introduction, presentation of the internship work, introduction of certain production methods, measuring procedures, software tools, etc.

  • What do I do if I do not receive my internship certificate on time?

Once you have received your internship certificate from the company, please upload it in the Internship Management System. It is important that you upload the internship report and the presentation on time.

  • Can I take exams during the practical semester?

Yes, you can take exams.

  • Do I have to register for the practical module exam?

No exam registration is required for the practical semester/practical module.

  • What do I do if the PLV week takes place during my internship?

The company has to release you for the PLV Week, but this week has to be made up at the company. We make an exception for semesters abroad, please contact Albert Schreiner if you cannot attend the PLV Week.

  • Can I attend the PLV Week before my internship?

No, internship and PLV weeks must be completed in the same semester.

  • Why have I not received any ECTS yet for the practical semester?

Only when you have successfully completed your first and second PLV week as well as your internship and have uploaded your documents completely, the credits will be added to your Primuss account!

  • Can my internship contract be extended?

An extension of the mandatory internship by the university is not possible.

Albert Schreiner will be happy to answer any further questions about the practical semester and PLV weeks.

PLV:

 

Career Service PLV:

 

Campus Cham

 

Frequently asked questions regarding the PLV weeks:

Below you will find a list of the most frequently asked questions and answers about the internship semester and PLV weeks. For further information, please contact Ms Adrienn Jaksch (Deggendorf campus) or the degree programme assistant (studium-cham@th-deg.de) (Cham campus).

  • How long does the practical semester last?

The internship semester lasts a total of 20 weeks, of which at least 18 weeks are spent in the company and two PLV weeks.

  • When can I start my internship semester?

You must have earned at least 90 ECTS credits. The internship semester takes place in the sixth semester. Exception: Bachelor of Mechatronics & Project Management for Digital Production at the Cham campus (the internship semester is in the fifth semester).

  • When are the PLV weeks?

Deggendorf campus: The first PLV week consists of seven Career Service seminars.

Cham campus: The first PLV week takes place at the end of the fifth semester (mechatronics - specialising in digital production) or at the end of the fourth semester (mechatronics & project management for digital production).

The second PLV week takes place during the lecture-free period towards the end of September.

  • Where must I hand in my internship contract?

Deggendorf Campus: In Primuss you will find the internship administration and, as described in the overview there, upload the contract and register the internship semester.

Cham campus: In Primuss you will find the internship administration and, as described in the overview there, upload the contract and register the internship semester.

  • When do I have to hand in the contract at the latest?

One week before the start of the PLV-1 week. If you are unable to meet this deadline, please contact Ms Adrienn Jaksch (Deggendorf campus) or the study programme assistant - studium-cham@th-deg.de (Cham campus) in good time!

  • Where can I find companies that offer an internship?

Deggendorf campus: You can find company names in the display case on the 2nd floor of the C building. For semesters abroad, you can find company addresses in iLearn at the Career Service.

Cham campus: Please contact Ms Claudia Potter, who represents the Career Service at the Cham teaching location.

  • What documents does the university need after my internship?

We require an internship report and the internship certificate one week before the second PLV week.

  • Where do I have to hand in the documents?

Simply upload digitally ον the Primuss portal.

  • Can I have days off?

You may have a maximum of five days of absence during your internship at the company. You are not allowed to miss any days during the PLV weeks.

  • Do holidays have to be made up?

Basically yes, unless the company gives you those days.

  • I cannot register in the internship administration program?

Change your password. 

If this does not work, please contact us by e-mail at primuss-support@th-deg.de

  • How should the internship report be designed?

The internship report should be at least 10 A4 pages long and provide an overview (content, highlights, project overview) of your internship semester. It should not be a report booklet.

  • What do I do if I do not receive my internship certificate on time?

As soon as you receive the internship certificate from the company, please upload it via the Primuss portal. It is important that you submit your internship report and presentation on time.

  • Can I take exams during the practical semester?

Yes, you can take exams. 

  • What do I do if the PLV week takes place during my internship?

Company must excuse you for the PLV week, but you must make up this week at the company. There are exceptions for semesters abroad. If you are unable to attend the PLV week for any reason, please contact Ms Adrienn Jaksch(Deggendorf campus) or the degree programme assistant - studium-cham@th-deg.de (Cham campus) in good time.

  • Can I attend the PLV Weeks before my internship?

Deggendorf campus: The first PLV week, consisting of seven Career Service seminars, should be completed from the first semester onwards.

Cham campus: If you have been successfully exempted from the internship semester by the internship officer, you must still attend the PLV 1 week, as it is still part of the fifth or fourth semester.

  • Why do I have the status "not passed" in the internship administration program?

You will only receive the status "passed" in the Primuss portal once you have successfully completed your two PLV weeks and your internship and uploaded your documents in full!

  • Why have I not received any ECTS yet for the practical semester?

You will only receive your ECTS credits in Primuss once you have successfully completed your two PLV weeks and your internship, your documents have been uploaded in full and your documents meet our requirements!

  • Where can I find information about an internship abroad?

You can find company addresses and important information about the semester abroad at: Going Abroad.

  • Can my internship contract be extended?

It is not possible for the university to extend the internship contract. 

 

Ms Adrienn Jaksch (Deggendorf campus) or the degree programme assistant - studium-cham@th-deg.de (Cham campus) will be happy to answer any further questions you may have about the practical semester and PLV weeks.

Career Service PLV (1st PLV):

 

Information about 2nd PLV in

  • Bachelor Healthcare Informatics
  • Bachelor Management in Health, Social and Rescue Services

please find in iLearn.

Career Service PLV:

  •  

semester overview

Lecture periods, study free periods and exam periods:

Lecture period in the winter semester 2027/2028 1)

The winter semester begins on 1 October 2027 and ends on 14 March 2028.

Start of lectures

  • Monday, 4 October 2027 2)

End of lectures

  • Tuesday, 25 January 2028

Lecture-free period

  • Sunday, 3 October 2027 (Day of German Unity)
  • Monday, 1 November 2027 (All Saints' Day)
  • Tuesday, 2 November 2027
  • Friday, 24 December 2027 up to and including Friday, 7 January 2028 (Christmas)
  • Wednesday, 26 January to Tuesday, 14 March 2028

Recommended examination period

  • 26 January to 14 February 2028

Semester break

  • 15 February to 14 March 2028

 

1) Statutes on lecture times at the Deggendorf University of Applied Sciences of 01.01.2023.

2) No lectures of the higher semesters may take place on the first semester day.

Lecture period in the summer semester 2027 1)

The summer semester begins on 15 March 2027 and ends on 30 September 2027.

Start of lectures

  • Monday, 15 March 2027

End of lectures

  • Friday, 9 July 2027

Lecture-free period

  • Thursday, 25 March up to and including Tuesday, 30 March 2027 (Easter)
  • Saturday 1 May 2027 (Labour Day)
  • Thursday, 6 May 2027 (Ascension Day)
  • Friday, 14 May up to and including Tuesday, 18 May 2027 (Whitsun)
  • Thursday, 27 May 2027 (Corpus Christi)
  • Friday, 28 May 2027
  • Saturday, 10 July to Thursday, 30 September 2027

 

Recommended examination period

  • 13 July to 31 July 2026

Semester break

  • 1 August to 30 September 2026

 

1) Statutes on lecture times at the Deggendorf University of Applied Sciences from 01.01.2023

Lecture period in the winter semester 2026/2027 1)

The winter semester begins on 1 October 2026 and ends on 14 March 2027.

Start of lectures

  • Thursday, 1 October 2026 2)

End of lectures

  • Friday, 22 January 2027

Lecture-free period

  • Saturday, 3 October 2026 (Day of German Unity)
  • Sunday, 1 November 2026 (All Saints' Day)
  • Monday, 2 November 2026
  • Thursday, 24 December 2026 up to and including Wednesday, 6 January 2027 (Christmas)
  • Tuesday, 24 January to Sunday, 14 March 2027

Recommended examination period

  • 25 January to 14 February 2027

Semester break

  • 15 February to 14 March 2027

 

1) Statutes on lecture times at the Deggendorf University of Applied Sciences of 01.01.2023.

2) No lectures of the higher semesters may take place on the first semester day.

 

Lecture period in the summer semester 2026 1)

The summer semester begins on 15 March 2026 and ends on 30 September 2026.

Start of lectures

  • Monday, 16 March 2026

End of lectures

  • Friday, 10 July 2026

Lecture-free period

  • Maundy Thursday, 2 April up to and including Tuesday, 7 April 2026 (Easter)
  • Friday, 1 May 2026 (Labour Day)
  • Thursday, 14 May 2026 (Ascension Day)
  • Friday, 22 May up to and including Tuesday, 26 May 2026 (Whitsun)
  • Thursday, 4 June 2026 (Corpus Christi)
  • Friday, 5 June 2026
  • Monday, 13 July to Wednesday, 30 September 2026
     

Recommended examination period

  • 13 July to 31 July 2026

Semester break

  • 1 August to 30 September 2026

 

1) Statutes on lecture times at the Deggendorf University of Applied Sciences from 01.01.2023

 

Lecture period in the winter semester 2025/2026 1)

The winter semester begins on 1 October 2025 and ends on 14 March 2026.

Start of lectures

  • Wednesday, 1 October 2025 2)

End of lectures

  • Friday, 23 January 2026

Lecture-free period

  • Friday, 3 October 2025 (Day of German Unity)
  • Saturday, 1 November 2025 (All Saints' Day)
  • Wednesday, 24 December 2025 up to and including Tuesday, 6 January 2026 (Christmas)
  • Saturday, 24 January to Saturday, 14 March 2026

Recommended examination period

  • 26 January to 14 February 2026

Semester break

  • 15 February to 14 March 2026

 

1) Statutes on lecture times at the Deggendorf University of Applied Sciences of 01.01.2023.

2) No lectures of the higher semesters may take place on the first semester day.

Lecture period in the summer semester 2025 1)

The summer semester begins on 15 March 2025 and ends on 30 September 2025.

Start of lectures

  • Monday, 17 March 2025

End of lectures

  • Thursday, 10 July 2025

Lecture-free period

  • Maundy Thursday, 17 April up to and including Tuesday, 22 April 2025 (Easter)
  • Thursday, 1 May 2025 (Labour Day)
  • Thursday, 29 May 2025 (Ascension Day)
  • Friday, 6 June up to and including Tuesday, 10 June 2025 (Whitsun)
  • Thursday, 19 June 2025 (Corpus Christi)
  • Friday, 20 June 2025
  • Friday, 11 July to Tuesday, 30 September 2025
     

Recommended examination period

  • 11 July to 31 July 2025

Semester break

  • 1 August to 30 September 2025

 

1) Statutes on lecture times at the Deggendorf University of Applied Sciences from 01.01.2023

 

Lecture period in the winter semester 2024/2025 1)

The winter semester begins on 1 October 2024 and ends on 14 March 2025.

Start of lectures

  • Tuesday, 1 October 2024 2)

End of lectures

  • Friday, 24 January 2025

Lecture-free period

  • Thursday, 3 October 2024 (German Unification Day)
  • Friday, 1 November 2024 (All Saints' Day)
  • Saturday, 21 December 2024 up to and including Monday, 6 January 2025 (Christmas)
  • Saturday, 25 January up to and including Friday, 14 March 2025

Recommended examination period

  • 25 January to 14 February 2025

Semester break

  • 15 February to 14 March 2025
     

1) Statutes on lecture times at the Deggendorf University of Applied Sciences of 01.01.2023.

2) No lectures of the higher semesters may take place on the first semester day.

 

re-registration

If students at Deggendorf Institute of Technology wish to continue their studies in the next semester, they must re-register for further studies before the start of the next semester in accordance with Art. 93 Para. 1 BayHIG. Re-registration is effected by the timely and complete payment of all fees and contributions due to the account of the Staatsoberkasse. Students who do not fulfil the obligation to re-register will be de-registered.

Please also refer to the current information about Re-Registration

 

Contributions and fees

You can find information about the applicable contributions and fees here: Fees

 

Payment

Payment is made using the e-payment procedure. You can pay the student union fee directly from the Primuss Portal / My Studies using PayPal or credit card (Visa or Mastercard).

 

Identity card and certificate

Please remember to validate your student ID once you have re-registered. It is possible to renew your ID card (printed on the front of the chip card at the self-service terminal) and print out a confirmation of re-registration via the Primuss portal as soon as the payment data has been transmitted by the State Student Administration Office and entered in the database.
The certificate of enrolment for the coming semester is only available in the Primuss portal at the beginning of the semester.

 

Missed the re-registration period?

If you have missed the re-registration period, please contact your responsible clerk at the center for studies for further clarification. 

Further information:

  •  

fees

Student union fee:

All students are obliged to pay the student union fee of €82. Please note that in the case of double enrolment, the Studierendenwerk fee is only payable for one degree programme. After payment, please inform your responsible clerk at the center for studies for which degree programmes you would like to be re-registered.

Information on paying the student union fee can be found here: Re-registration

Further information:

 

Application and service fees for international students from third countries

For international students who do not come from the EU or the EEA and have been enrolled from 15 April 2023 (this therefore applies to students starting from the winter semester 2023/24), service fees of EUR 500.00 per semester will be due from the winter semester 2025/2026 onwards upon re-registration, in accordance with the DIT fee regulations. The service fees must be paid together with the student union fee. Further information on application and service fees can be found here: Application and service fees

 

Fees Centre for Academic Further Education

Students on part-time degree programmes are subject to separate tuition fees, which are billed separately. You can obtain detailed information on this from your contact person at the Centre for Academic Further Education.

student id-card

  • The expiry date of the student ID card must be printed on the card to warrant its validity. This is needed to obtain various student discounts.
  • Don't try and remove the date yourself, as you might damage the card.
  • In Deggendorf, the validation stations are located in the foyer of Building B, in front of room B006. In Pfarrkirchen, the validation station is located in the entrance area, next to the stairs. In Cham, the validation station is located in the printer room in the foyer, room number 0.10
  • Please follow instructions on the screen.

  •  

    instructions for the validation station

    You can use this terminal to print out a new validity date, otherwise known as an expiry date, onto your student ID card. At the moment there are two different card types!

     
    Card type 1 "new"

    Identifiable by the seven digit ID number (e. g. "S 1234567). Insert your card as shown on the photo, with the front facing forwards.

     
     

     

     
    Card type 2 "old"

    Identifiable by the six digit ID number (e. g. "S 123456" or "123456"). Insert your card as shown on the above photo, with the back facing forwards.

     

     

    possible errors

  • You do not see any date printed on your student ID:
    • Did you insert the card into the terminal the wrong way around?
    • Is your card badly bent or is the coating peeling off? Has the printing strip been scratched off? In this case, you must apply for a new card (See Application to re-issue your student ID card)
  • Only one of the fields matriculation number, degree programme or expiry date is invalid. Please try again.

For Students

  • It prevents waiting times
  • It allows students to move and work independently from various campus regular opening times
  • It enables cash free payement in the campus canteen (known as Mensa!), the copy shop, the career service and the language centre
  • It combines a range of individual cards in this one multifunctional ID card

For the university

  • Unification of administrative procedures
  • Relief of the centre for studies with routine procedures
  • Saving of resources
  • Security for the payment of fees
  • Reduction of administrative burden through self-service
     

Lost student ID card

Please apply for a new student ID card.

 

Student ID card doesn’t work

What exactly doesn’t work?

  • Only making payments with the card doesn’t work. The gate at the student parking lot opens or the date imprint on the back of the card worked.
    • It is probably just the electronic payment system that isn’t working. The Student Union can most likely repair it. Please go to Room F 101.
    • If the Student Union is unable to repair your card, you must apply for a new card.
    • Please consult a member of staff in the B Building.
  • The card is not recognised by any device (cafeteria, gate at the parking lots, validation terminal).
    • Please apply for a new card.
  • Follow Me Printer doesn’t work.
    • You changed your programme of study: Please use the login name and the student ID from your new programme.

 

I would like to transfer credit or exchange my credit for cash

  • Please consult the Student Union (room F 101) or the copy shop. The university has no access to the electronic accounts of external providers.

If you need any help please contact campuscard-support@th-deg.de.

leave of absence (sabbatical)

A semester of leave of absence means that students are in a semester off (6 months) but remain enrolled at the university. 

Reasons for a leave of absence within the meaning of Art. 93 para. 2 BayHIG are in particular

  • medically certified illness if it prevents proper study in the semester in question,
  • Circumstances such as the use of protection periods in accordance with the Maternity Protection Act (Mutterschutzgesetz), the care of a child in accordance with the Federal Parental Allowance and Parental Leave Act (Bundeselterngeld- und Elternzeitgesetz),
  • the care of a close relative in accordance with the Caregiver Leave Act (Pflegezeitgesetz),
  • Completion of a voluntary internship that is not prescribed by the relevant study and examination regulations within the standard period of study,
  • if the subsequent semester required according to the student's progress is not offered.

Other reasons will only be recognised after strict examination of the individual case.
As a rule, economic circumstances cannot be recognised as an important reason.

Applications and instructions

To apply for a semester of leave of absence, please complete the application online in the Primuss Portal under "Applications and Messages" and submit it to the Study Centre.

Please note when applying for leave of absence:

1. a leave of absence in accordance with Art. 93 para. 2 BayHIG must be applied for in writing; the important reason must be proven.

2. the application for a leave of absence can be submitted from the date of re-registration until 15 October in the winter semester and until 31 March in the summer semester.

3. if the reason for leave of absence does not occur until after expiry of the deadline specified in section 2 without this being foreseeable, students may submit the application by 30 November in the winter semester and by 15 May in the summer semester. Reasons for leave of absence occurring later can no longer be considered.

Please also note:

If you are planning to take a semester off, you must re-register in any case. The student union fee must be transferred to the Staatsoberkasse Bayern.

Further information on the enrolment, re-registration and de-registration regulations.

de-registration (exmatriculation)

  • The student is exmatriculated at the end of the semester in which he or she passed the final examination.
  • A student shall be de-registered if he or she has definitively failed a preliminary, intermediate or final examination required by the examination regulations, unless he or she changes to a course of study which is not the same in the basic study period.
  • A student shall be de-registered if, without being on leave of absence, he or she has not registered for further studies in due time before the beginning of a semester or academic year.
  • A student will be exmatriculated if he or she does not pay the tuition fees on time.

 

Application

You can complete this application online in the Primuss portal under "Applications and Messages" and submit it to the study centre.

Notes on de-registration

The de-registration certificate must be kept carefully and must be presented to the new university when changing universities.

You can apply for your student services fee (Studierendenwerksbeitrag) to be reimbursed if you are de-registered before the start of the following semester. Please apply for the refund through the Primuss Portal via "Forms and Messages" (Anträge und Nachrichten)

In case you don't have access anymore, please use the DIT form.

The application deadlines are:

  • 30 September - for the winter semester
  • 14 March- for the summer semester

If you de-register after the beginning of the following semester, on the first lecture day at the latest, reimbursement of the semester fees can only be processed via the Studierendenwerk (student union). To do this, the application must reach the student union within 14 days. Please submit the application together with your student ID to the Studierendenwerk.

The form and furthere information can be found here: www.stwno.de/en/home-en2/semester-contribution-and-tickets

 

 

Your claim to student health insurance expires when your name is removed from the student register.  From this point in time, you are responsible for your own health insurance. Please contact your local unemployement office in case of unemployment.

If you received Bafög, please inform your local office for educational grants as quickly as possible about your removal from the student register.

Keep this document in a secure place.  Please show this to the Pension Scheme Authorities directly after taking up a position covered by pension scheme requirements. 

Please return your university documents as well as library books (if you have not so already).
The copy shop and Studierendenwerk can pay out any leftover money on your account for the mensa and photocopies.
The smart card is yours to keep.

 

Please notify the child allowance money authorities as soon as you have finished your degree if your parents have been entitled to child allowance money.

Transferring to another University

  • Further study in a programme or course of study with related introductory subjects at a Bavarian University of Applied Sciences in Bavaria is not possible if you have been removed from the student register due to having irrevocably failed one examination. 
  • Application to another course of study within the University is possible any time within the respective application deadline.

 

Please contact the Centre for Studies and your relevant advisor if you have questions.

recognition of academic achievements

communication guide

The DIT communication guide provides you with general communication guidelines. Whether it's a personal conversation, a phone call, WhatsApp advice or virtual events - the guide covers all areas. You are perfectly prepared with the guide to communicate successfully on campus, at work or with strangers.

THD KOMMUNIKATIONSLEITFADEN

university law - statutes & regulations

All of the following documents are only available in German. Please contact your study representative if you have any further questions

 

Framework Examination Regulations for additional training in foreign languages and general elective subjects at the Deggendorf Institute of Technology from 1 October 2018

Statutes on the detailed organisation of the local selection process and on the pre-registration for unrestricted study programmes at Universities of Applied Sciences - Deggendorf Institute of Technology (new version) from summer semester 2009 and amended statutes

Statutes and regulations for all study degrees:

Basic regulations:

General examination regulations (APO=Allgemeine Prüfungsordnung):

Practical study semester:

Academic degrees:

Study and examination regulations:

Admission restrictions:

Selection process:

Aptitude test:

Tuition fees / Enrolement, Re-registration and De-registration Statutes:

  • Civil and Construction Engineering (Master) (German)